Product Range
- Pre-molded and Heat Shrinkable Straight Through Joint for 3/C & 1/C
XLPE cables up to 39kV.
- Pre-molded and Heat Shrinkable Cross Bonded Joint for 1/C
XLPE cables up to 36kV.
- Heat Shrinkable Straight through joint for 3/C & 1/C Paper insulated MIND cables up to 36kV.
- Heat Shrinkable Indoor & Outdoor Termination for 3/C & 1/C XLPE & paper insulated MIND cables up to 36kV.
- Heat Shrinkable Straight Through Joint & Branch joint for 4/C XLPE/PILC cables.
- Heat Shrinkable Joint for Control & Signal cables.
- End Caps for sealing cable-ends for plastic and paper insulated cables.
- Wraparound Sleeve for the repair of damaged cable sheaths.
- Cable Sheath Repairing Kit.
- Outdoor Insulators up to 36kV for outdoor Termination.
- Inline & Right Angle Boots for Insulating bushings info cable boxes designed with reduced air clearance (compound filed type). ore were possibilities of flashover exits (due to high humidity etc)
- Bushing Insulating Elastometic Boots (Flexible Boots)
- Heat Shrink Adhesive Coated Tubes.
- High, Medium, and Wall Tubes.
- Bus Bar Tubes.
- Pre-molded and Heat Shrinkable Straight Through Joint for 3/C & 1/C
XLPE cables up to 39kV.
- Pre-molded and Heat Shrinkable Cross Bonded Joint for 1/C
XLPE cables up to 36kV.
- Heat Shrinkable Straight through joint for 3/C & 1/C Paper insulated MIND cables up to 36kV.
- Heat Shrinkable Indoor & Outdoor Termination for 3/C & 1/C XLPE & paper insulated MIND cables up to 36kV.
- Heat Shrinkable Straight Through Joint & Branch joint for 4/C XLPE/PILC cables.
- Heat Shrinkable Joint for Control & Signal cables.
- End Caps for sealing cable-ends for plastic and paper insulated cables.
- Wraparound Sleeve for the repair of damaged cable sheaths.
- Cable Sheath Repairing Kit.
- Outdoor Insulators up to 36kV for outdoor Termination.
- Inline & Right Angle Boots for Insulating bushings info cable boxes designed with reduced air clearance (compound filed type). ore were possibilities of flashover exits (due to high humidity etc)
- Bushing Insulating Elastometic Boots (Flexible Boots)
- Heat Shrink Adhesive Coated Tubes.
- High, Medium, and Wall Tubes.
- Bus Bar Tubes.
Prower cable Terminations (Supply & Installation Service)
Pre-molded (Non-Thermal) Indoor& Outdoor Terminations Suitable for all kinds of Polymeric Cables up to 36 kV.
Salient Features:
Pre-molded Terminations are made of silicone rubber for Polymetric cables.
- Quick and easy Installation.
- Excellent Dielectric Strength: more than 20kV per mm.
- One-piece design with an integrated Stress control system that provides excellent stress control at Semicon terminating point.
- Separate lug sealing provision to provide an improved seal against moisture ingress.
- Long creepage distance by pre-designed shed arrangement.
- High protection from weathering and ultraviolet radiation.
- Suitable for deep indent, Hexagonal crimping type, and Mechanical (Screw Type) lugs.
- Earthing arrangement provided in the kit.
- Confirm to class 1 as defined in IEEE-48
Pre-molded (Non-Thermal) Indoor& Outdoor Terminations Suitable for all kinds of Polymeric Cables up to 36 kV.
Salient Features:
Pre-molded Terminations are made of silicone rubber for Polymetric cables.
- Quick and easy Installation.
- Excellent Dielectric Strength: more than 20kV per mm.
- One-piece design with an integrated Stress control system that provides excellent stress control at Semicon terminating point.
- Separate lug sealing provision to provide an improved seal against moisture ingress.
- Long creepage distance by pre-designed shed arrangement.
- High protection from weathering and ultraviolet radiation.
- Suitable for deep indent, Hexagonal crimping type, and Mechanical (Screw Type) lugs.
- Earthing arrangement provided in the kit.
- Confirm to class 1 as defined in IEEE-48
Prower cable Terminations (Supply & Installation Service)
Heat Shrinkable Indoor& Outdoor Termination Suitable
for all kinds of Polymeric Cables - up to 36kV.
Salient Features:
- Stress Control Tube to eliminate discharges at Semicon terminating point.
- Non-Tracking Tube to provide resistance against weather and ultraviolet radiation.
- Total environment seals at interfaces.
- Can be energized immediately after completion.
- Required creepage distance can be achieved by increasing the number of sheds and the tube length.
- Suitable for deep indent, Hexagonal crimping type, and Mechanical (Screw Type) lugs.
- Earthing arrangement provided in the lit.
- Confirm to class 1 as defined in IEEE-48
Heat Shrinkable Indoor& Outdoor Termination Suitable
for all kinds of Polymeric Cables - up to 36kV.
Salient Features:
- Stress Control Tube to eliminate discharges at Semicon terminating point.
- Non-Tracking Tube to provide resistance against weather and ultraviolet radiation.
- Total environment seals at interfaces.
- Can be energized immediately after completion.
- Required creepage distance can be achieved by increasing the number of sheds and the tube length.
- Suitable for deep indent, Hexagonal crimping type, and Mechanical (Screw Type) lugs.
- Earthing arrangement provided in the lit.
- Confirm to class 1 as defined in IEEE-48
Load Break Switch
General: Open/Close an electrical circuit
Benefit: Allows for isolation of sections of the distribution network to reduce downtime during maintenance or corrective action and downtime area.
General: Open/Close an electrical circuit
Benefit: Allows for isolation of sections of the distribution network to reduce downtime during maintenance or corrective action and downtime area.
Line Recloser
General: Open or Close electrical circuit. Detect faults and clear faults in the line.
Benefit: Improves service continuity by auto re-close to the line after a momentary fault.
General: Open or Close electrical circuit. Detect faults and clear faults in the line.
Benefit: Improves service continuity by auto re-close to the line after a momentary fault.
Powered by
MakeWebEasy.com